Home Choose your language: Go to the english site Ir a la pagina en español Gå til den danske hjemmeside Zur deutschen Seite Naar de nederlandse site Go to the swedish site Go to the french site

Our Solution

◊ The Schrijver systeem® Δ


Fitted cement element The Schrijver systeem® is a Dutch invention named after the inventor Henk Schrijver. The system is specially developed to tackle the causes of excessive damp and has become a great success! Since 1976, the system has been produced and installed to full customer satisfaction in over 25,000 homes in the Netherlands. Outside the Netherlands, the system has been placed in Belgium, France, Italy, Portugal and Spain. Only after extensive laboratory tests and the results of test houses did the system receive its official patent in 1988. In the same year the system won first prize in the Dutch national competition for inventions (Nationale Ideeënbus).

◊ How It Works Δ

Cement element technical drawing The Schrijver systeem® is a humidity regulating system which consists of a stone element and a ceramic tube. The whole system is fixed in a specially prepared niche in the outside wall. Through an opening in the element, dry air can flow into the system. This air is led directly to the ceramic tube and two air chambers. A second opening in the system causes a draught. This leads to a drop in temperature within the tube and as a result a cold bridge is created. Since humidity tends to form at the coldest spot, it will gather in the ceramic tube from where it is transported outside by the airflow. In the same way, condensation from within the house also disappears.
Our own specialists install the Schrijver systeem® around the building in the outside walls (approx. 1 element per 1.4 running foot / 2.3 per meter) at about 14 inches (35 cm) above ground level. By means of this intensive method of natural ventilation, damp will be constantly withdrawn from the building, even under the floor. The amount of damp that is withdrawn depends on weather conditions and wind speed. The system is a very natural and environmentally friendly solution which does not use chemicals or involve complicated construction work. The Schrijver systeem® has been successfully fixed in both insulated and non-insulated houses and in both single brick and cavity walls. It can be easily placed in both new and existing houses, and even buildings of special significance such as monuments, castles and churches.


the Schrijver systeem® in single brick wall The Schrijver systeem® in a cavity wall

1. interior side of wall; 2. exterior side of wall
3. first air chamber; 4. second air chamber
5. cold bridge; 6. ceramic tube
7. insulated cavity; 8. non-insulated cavity

red = dry air
blue = humid air

Schematic projection of the Schrijver systeem®.

◊ Installation Δ

The Schrijver systeem® will be installed by one of our employees. The installation is done with no inconvenience to you and the system comes with a lifetime guarantee. The elements have to be installed into a closed system around the house.

◊ Suitability Δ

Two rows of the system installed The Schrijver systeem® has been successfully installed in both insulated as non-insulated buildings and by both single brick as cavity walls. The system can be used without any problems in new to build and existing buildings; this also includes special buildings like monuments, castles and churches.

◊ Research Δ

Research: The Schrijver systeem® scientifically tested Continue reading ...